Product ID:PENETRATING OIL 597D (VV-P-216)
MSDS Date:09/12/1984
FSC:9150
NIIN:00-589-7123
MSDS Number: BRLYG

NATIONWIDE INDUSTRIES CORP

501 S BASINGER RD
PANDORA, OH 45877-9749
US

Emergency Phone: 419-384-3241

Info Phone: 419-384-3241

Preparer: DOD/HMIS (DGSC-SSH)

Cage: 74438

R.M.HOLLINGSHEAD (SUCCEEDED BY CAGE 744

PANDORA, OH 45877-9749 US

Cage: 08495

PETROLEUM DISTILLATE

CAS: 8002-05-9

RTECS: SE7175000

Fraction By Weight: 71%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM

MINERAL OIL

Fraction By Weight: 25%

OSHA PEL 5 MG/M3 OIL MIST

ACGIH TLV: 5 MG/M3 OIL MIST9192

ORTHODICHLOROBENZENE

CAS: 30560-19-2

Fraction By Weight: 3.0%

PHENOL (SARA III)

CAS: 108-95-2

RTECS: SJ3327000

Fraction By Weight: 1.0%

OSHA PEL S, 5 PPM

ACGIH TLV: S, 5 PPM; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:EYES: MAY CAUSE IRRITATION. SKIN:
EXCESSIVE PROLONGED OR REPEATED SKIN CONTACT MAY CAUSE DRYING,
DERMATITIS DUE TO DEFATTING ACTION COMMON TO ALL OILS. INHALATION:
NOT KNOWN TO HAVE ADVERSE EFFECTS BU T SHOULD BE AVOIDED.
INGESTION: ASPERATION OF LIQUID OIL INTO LUNGS CAN CAUSE DANGEROUS
PNUEMONITIS.
Explanation of Carcinogenicity:INFORMATION NOT GIVEN BY MANUFACTURER.
Effects of Overexposure:EYES: IRRITATION. SKIN: DRYING, DERMATITIS,
DEFATTING. INHALATION: NOT KNOWN TO HAVE ADVERSE EFFECTS.
INGESTION: ASPIRATION OF LIQUID OIL INTO LUNGS CAN CAUSE
PNUEMONITIS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER. IF IRRITATION
PERSISTS GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING.
WASH AREA WITH MILD SOAP AND WATER. OTHERWISE, USE EMOLLIENT CREAM
IF NEEDED. INHALATION: MOVE TO FRESH AIR. IF NOT BREATHING GIVE
CPR. IF BREATHING DIFFICULT, GIVE OXYGEN. GET MEDICAL ATTENTION.
INGESTION: DO NOT INDUCE VOMITING. GET MEDICAL ATTENTION.

Flash Point Method:TOC
Flash Point:115F,46C
Lower Limits:1.0
Upper Limits:9.0
Extinguishing Media:CARBON DIOXIDE, STANDARD FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE WATER SPRAY TO COOL FIRE EXPOSED SURFACES.
WEAR POSITIVE FEED, SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:VAPORS ARE HEAVIER THAN AIR AND MAY
TRAVEL ALONG THE GROUND. THEY CAN BE IGNITED AT LOCATIONS DISTANT
FROM HANDLING POINT BY FLAMES, PILOT LIGHTS,ELECTRIC ARCS.

Spill Release Procedures:REMOVE SOURCES OF IGNITION. STOP RELEASE OF
OIL.RECOVER SMALL SPILLS BY MOPPING, VACUUMING, OR WITH INERT
ABSORBENT MATERIAL. DIKE LARGE SPILLS AND PUMP INTO SALVAGE TANK.
ABSORB RESIDUE IN INERT ABSO RBENT MATERIAL AND SHOVEL INTO
DISPOSALCONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL, DRY WELL VENTILATED
AREA AWAY FROM SOURCES OF IGNITION. PROTECT FROM PHYSICAL DAMAGE.
KEEP CONTAINERS CLOSED.
Other Precautions:CONTAINER MAY BE HAZARDOUS WHEN EMPTIED, SINCE
CONTAINERS RETAIN PRODUCT RESIDUES (VAPORS, LIQUID AND/OR SOLIDS).

Respiratory Protection:NOT NECESSARY IN NORMAL USE. USE NIOSH APPROVED
RESPIRATOR APPARATUS IF TLV IS EXCEEDED.
Ventilation:LOCAL EXHAUST USUALLY NOT NEEDED IN OPEN AREAS.
Protective Gloves:NOT NECESSARY IN NORMAL USE.
Eye Protection:CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:NOT NORMALLY NEEDED.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NATIONWIDE IS THE SUCCESSOR TO R. M. HOLLINGSHEAD. THIS NSN WAS
CANCELLED IN 1982. USE NSN 9150-00-261-7899. THIS MSDS COPIED FROM
ONE FROM THE SUCCEEDING COMPANY FOR THE SUCCEEDING NSN.

HCC:V6
NRC/State Lic Num:NONE
Boiling Pt:B.P. Text:315F,157C
Vapor Density:3.9(AIR=1)
Spec Gravity:0.83
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GREEN COLOR WITH SHARP ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
ASPHYXIANTS, AND SMALL QUANTITIES OF CHLORIDES.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS. MANUFACTURER SUGGESTS ATOMIZING WASTE OIL
IN APPROVED INCINERATOR.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.